There are a lot of things to discuss when we talk about the E-bike battery. Your bike’s battery working principles and efficiency depends upon the rider’s usability. So it is pivotal to grasp the overall working and performance factors of a bike battery.
This article will cover everything about your electrical bike batteries in complete detail. So you can get a perfect understanding at the end of the topic.
Let’s not waste more time, and begin our discussion right away!
The Factors that Undermine Your Bike Battery Performance
There are a couple of notable factors that reduce the performance of your e-bike battery. So it is important to brief them in detail!
1. Extra Weight/Luggage
You might be aware of this process. It happens as the extra weight on the engine demands more power supply from the e-bike battery. The battery life is ultimately reduced whenever you put extra weight on the engine. You will no longer be in a position to travel long distances. So, extra weight stretches the engine to deliver more power by the battery. That way, e-bike battery timing is reduced.
2. Tire Pressure
Low tire pressure can result from minimum e-bike battery performance. This is something that most people don’t remember, but it does make a big difference. Lower pressure in the tires will require more power from the battery to manage the speed limit. Also, you are likely to lose the speed limit with the low pressure in tires. So it is better to maintain pressure inside your E-bike tires to cut down additional power requirements from the e-bike battery.
3. Extreme Weather Conditions
Sometimes, an e-bike battery can go through an internal tussle to maintain a normal temperature in extreme climatic conditions. If you are driving in extremely hot weather, the battery will not be able to provide consistent performance. It will lose power in maintaining the ideal temperature for better working. It must be noted that electrical bike batteries work better in temperate climatic regions. So a battery’s performance can be affected by extreme weather as well.
4. Busy Roads
Your bikes’ battery can’t produce its ideal mileage with abundant cars/vehicles on the road. The bike will have to stop and repeatedly start due to traffic. That is the time when it takes a lot of power to start the engine more frequently. It ultimately reduces the performance and timing of your battery.
What Should be Done Then?
You can try to put your bike in the lowest gear when stuck in bad traffic. Therefore, you will no longer have to switch on the bike again and again. This will help you save power and preserve it for long distances.
How can You Prolong/Enhance the Bike Battery?
Most people ask this question, and it’s an important one. Some important things can be done to elevate the battery life. You will be able to cover long distances without having to confront troubles.
1. Use Insulated Cases
This is one of the important things to do when living in extreme weather conditions. Extremely cold and hot weather can reduce the battery timing of your bike. Many companies have introduced insulated cases for electric bike batteries to address this issue.
You can just put such a use case on your bike’s battery to help it maintain a constant temperature. This temperature will keep your bike in comfortable stead to cover better mileage.
2. Overloading is Not the Way to Go
Many people or travelers put substantial luggage on their bikes when exploring new places. But that’s what put your battery’s life on the back foot. The extra stress on the engine will reduce the battery performance of your bike.
So make sure to minimize the loads when you are traveling somewhere distant. Putting a lot of luggage can impact your battery and will reduce its service life. Always carry essentials to keep your battery performance improved for distant journeys.
3. Store E-bike Battery When Not in Use
Many riders keep their battery connected with bikes when a battery exhausts. If you are not using the bike for a long-time, you will have to disconnect the battery. In addition, you are to store the battery somewhere safe and dry.
Keeping a battery connected with your bike will result in power dissipation when not in use. So disconnect the battery when you are sure not to use a bike for some time.
4. Maintenance
Always make sure to maintain your bike’s battery and check its fluid levels. In addition, ensure your battery has its refilling done using de-ionized water. That will allow your battery to have a useful service life.
Don’t use impure water when you are refilling your battery in the maintenance process. The impurities present inside the water may decrease the efficiency of the battery. So do check-up the battery regularly to keep the problems at bay.
5. Never Let it Exhaust
Exhausting a battery will result in a reduced number of hours when riding outside. A connected battery must remain charged daily. If you leave the battery without recharging it daily, it will lose its potency. So it is one of the finest techniques to keep your bike’s battery updated.
Moreover, charging your battery on a time pattern is way better than charging it irregularly. So make sure to devise a specific time pattern when you can put the battery on charge. That will result in significant improvements in battery performance overall.
6. Clean and Check for Leakage
You will have to clean the terminals of your battery to make a better performance impact when riding outside. The clogged terminals will have compromised the performance of the battery. So it would help if you regularly cleaned them to avoid obstructions.
Additionally, make sure to examine the battery for leakage before your ride outside. That will allow you to avoid hassle when in travel.
Choosing a Suitable Battery
It is important to select the right battery when you want to make a replacement. Therefore, you must consider the following factors to enhance the selection criteria.
1. Check Polarity
This is one of the important factors when making a battery replacement in your two-wheeled ride. You might end up facing connection issues when charging the bike with changed polarity. So it is important to check the polarity of your bike before making a purchase. Also, the connection wire length must be considered keenly to ensure no connection issue.
2. Size
Choosing a battery without considering the compatibility will put you in trouble for real. There are many size options when it comes to the E-bike battery. Always acquire a complete description before selecting the size of the battery. So battery selection is highly dependent on the size. Newer size options might just not fit into your bike. So make sure your battery doesn’t fall in this bracket.
3. Battery Technology
There are different battery technologies available in the consumer space. Each technology serves different possible benefits concerning riding and maintenance. But make sure that your selection merit puts you at ease but not in difficulty.
4. Starting Power
It is denoted by CCA that stands for Cold cracking Amps. This unit will help you determine the starting power of your bike concerning the battery. It denotes the frequency of amps in 30 seconds of time. If the battery delivers higher amps, your bike will have a better starting time overall. Therefore, it is necessary to check the CCA value when you are buying the battery for a specific bike variant.
Is Battery Replacement Worth it?
This question doesn’t have a simple answer as it depends upon your battery’s condition and service life. If you are facing constant issues with the battery performance, you can confidently replace the battery to avoid the constant hassle.
In addition, bike batteries often lose efficacy once their warranty expires. So if you feel this is happening in your case, make sure to replace it. Getting a new battery replacement will give your bike a new enhanced power capability and much more.
Final Words
So that was our discussion regarding the E-bike battery in full detail. The electrical bike batteries carry much care and maintenance at the end of the day. You will be required to follow certain ways to improve the battery performance of your bike. In addition, you also have a complete process when you want to make a battery replacement. Our detailed and extensive guide will put you in a confident position to select and thrive on any road.
